Home Page  E-Mail  Sitemap  Türkçe

• •  Practical Information
• •  Frequently Asked Questions
• •  Test Procedure
• •  Battery Maintenance Instructions
• •  Charge Procedure

What is the reason of low or high electrolyte density?

• if the density of electrolyte is low, it may be caused by overcharging of your car's generator or there should be a short circuit in your car
• if the density of electrolyte is high, your car might be overcharging.

For both of the conditions, you should see authorized dealer of BÜLBÜL Battery.

High water-loss of cells. What is the reason of this?
The reason is that your car may overcharge or there should a leakage from an opening or a break. In this case, ask for help from BÜLBÜL Battery dealer.

There is a leakage from plugs continuously. The reason is?
There should be electrolyte more than its necessity or there should be overcharging in your car. Go to a BÜLBÜL Battery dealer and ask for help.

March power of my car is very bad in the mornings. What should I do?
Very possible reason is that there should be a short circuit in your car and this cause a low march power for your car. In this case, contact with BÜLBÜL Battery dealer.

There is a melting at poles of battery. Is this harmful to my car or battery? What should I do?
In this manner, the junction of poles can be tender. This may cause an explosion of your battery or may cause a very low efficiency. Directly contact with a BÜLBÜL Battery dealer.

What is the reason of an explosion of battery?
There should be an obstruct at the plugs of your battery. To overcome this situation, please make BÜLBÜL Battery dealer to make the necessary maintenance according to guaranty conditions.

I have no march power. What should I do?
If you have no march power, your car should have short circuit or low charge capacity or problem at cable connections or battery should be broken down. Ask for the solution of the problem from the nearest BÜLBÜL Battery dealer.